When steam cleaning or deep cleaning carpets, a professional air mover can help you speed up the drying process. It pushes a strong stream of air across the carpet, helping moisture evaporate faster after cleaning or extraction.

For larger commercial carpet cleaning jobs or areas with a lot of moisture, a commercial dehumidifier can help you dry the space even faster by removing moisture from the air.

Adding an air mover to your cleaning toolbox can help you get carpets dry and put areas back into use sooner, especially during humid or wet weather in Canada.

Simply put: air movers help dry the space, while air scrubbers help clean the air.

An air mover is designed to move a large amount of air quickly. It’s commonly used for drying carpets, floors, walls, and other wet areas after cleaning or water damage.

An air scrubber is designed to filter the air. It pulls dusty or dirty air through its filters and sends cleaner air back into the space. For commercial cleaners, air scrubbers can be especially useful for post-renovation cleaning, construction dust, deep cleaning, and jobs where there are lots of fine particles in the air.

Air scrubbers with activated carbon filters can also help remove stubborn odours from the air, making them useful for jobs where both dust and unwanted smells are a concern.

Running an air scrubber while you clean can help reduce airborne dust and keep the work area cleaner. It’s another useful tool to have in your cleaning toolbox when the job involves more than just surface cleaning.

Oh yes! Air movers can help you dry commercial floors faster after mopping, floor cleaning, spills, or water damage. Getting wet floors dry sooner can also help reduce the time people are walking across slippery surfaces.

They’re especially useful during Canadian winter months, when snow and slush get tracked into building entrances. Place an air mover in these high-traffic areas to help dry wet floors faster and get the entrance back to normal sooner.

XPOWER air movers can be positioned at different angles, so you can use them for much more than floors. Direct the airflow toward walls, ceilings, furniture, and other hard-to-dry areas when the job calls for it.

An electric duster can help you quickly blow dust, dirt, and debris out of places that are difficult to reach with a cloth or vacuum.

They’re useful for computers and electronics, vents, keyboards, machinery, shelving, tight spaces, and other hard-to-reach areas.

You can also use an electric duster for precision drying when you need to direct airflow into a small or hard-to-reach area. This can help you dry around equipment, fixtures, seams, corners, and other spots where a larger air mover may be too much.

For commercial cleaners, an electric duster can help make detailed cleaning and drying jobs faster and easier. Unlike disposable cans of compressed air, it can be used again and again, making it a handy addition to your cleaning toolbox.

A ULV cold fogger can help you apply certain liquid treatments as a fine mist, making it easier to cover larger areas quickly and evenly. Depending on the product you're applying, foggers can be useful for odour control, disinfecting or sanitizing, and treating hard-to-reach areas.

For commercial cleaners, a ULV fogger can help you save time on larger jobs such as offices, commercial buildings, washrooms, vehicles, and other spaces where an even application is needed.

Just make sure the product you're using is approved for fogging and follow its instructions for dilution, application, ventilation, and re-entry.

A ULV fogger gives you another way to tackle larger treatment jobs quickly and efficiently.

You can use a ULV cold fogger to apply certain liquid treatments as a fine mist, including solutions used for odour control, sanitizing, disinfecting, and other cleaning applications.

Always check the product label and manufacturer's instructions before fogging. Not every cleaning chemical or disinfectant is designed for use in a ULV fogger. 

Never use flammable liquids or solutions that are not approved for fogging. Follow the recommended dilution, application, ventilation, and re-entry instructions for the product you're using.

Well, not every cleaning job needs a commercial dehumidifier, but it can be a very useful piece of equipment when there’s excess moisture in the air or you need to speed up drying.

After carpet cleaning, floor cleaning, water damage, or other jobs involving a lot of moisture, a dehumidifier pulls moisture from the air and helps the area dry faster. It works especially well when paired with an air mover.

Dehumidifiers can also be helpful during humid Canadian summers, when high indoor humidity can slow down drying.

If getting a space dry and ready for use quickly is important to your business, a commercial dehumidifier can be a valuable addition to your cleaning toolbox.

Dehumidifiers can also help you in high-humidity environments such as indoor pool areas, where excess moisture can make it difficult to keep floors and other surfaces dry.

The right air mover depends on the type of work you do, the size of the area, and how much moisture you need to dry.

For carpet cleaning and smaller jobs, a compact air mover can give you the airflow you need while being easy to carry and position. For larger commercial spaces or heavier drying jobs, look for a more powerful model that can move a higher volume of air.

It’s also worth considering how you’ll use it on the job. Models with multiple drying positions give you more flexibility, allowing you to direct airflow toward carpets, floors, walls, ceilings, and furniture.

For many commercial cleaning jobs, the XPOWER P-630HC is a great all-around option. It provides 2,980 CFM of airflow, has three speeds, and comes with wheels and a telescopic handle to make moving it around the job site easier.

You can also position it at different angles, so you can use it to dry carpets, floors, walls, ceilings, and other areas. The built-in carpet clamp is another handy feature when you're working with carpet.

If you’re not sure which model is right for you, reach out to us and we can help you choose based on the type of cleaning and drying work you do.

That depends on the size of the area, how wet it is, and how quickly you need it to dry. A small carpet-cleaning job may only need one or two air movers, while larger commercial spaces or water-damage jobs may require several.

You want enough air movers to keep strong, consistent airflow across the wet areas. Adding more isn't always better, though. As air movers pull moisture out of carpets and other wet surfaces, that moisture goes into the air. If humidity gets too high, drying can slow down.

This is where a commercial dehumidifier can help. Using air movers to move the moisture and a dehumidifier to remove it from the air can help you create a much more effective drying setup.

Having several air movers in your cleaning toolbox gives you the flexibility to tackle larger jobs and get more areas drying at the same time.